Masterctrl/Sources/Chalet/ChaletLoraDevice.cpp

#include "ChaletLoraDevice.h"
#include "GlobalDefine.h"


CChaletLoraDevice::CChaletLoraDevice(int Address, CAbstractNetworkCommIF *NetworkInterface):
    CNetworkDevice(ID_CHALET_DEVICE,Address,NetworkInterface)
{
    NetworkInterface->mDevicePtr = this;
    mDeviceAddress = Address;
    mDeviceID = ID_CHALET_DEVICE;


    mChaletStatusTimer = new QTimer();
    mChaletStatusTimer->setInterval(1000);
    mChaletStatusTimer->setSingleShot(true);
    connect(mChaletStatusTimer,SIGNAL(timeout()),this,SLOT(CommTimerExpired()));
}

CChaletLoraDevice::~CChaletLoraDevice()
{
    delete mChaletStatusTimer;
}

int CChaletLoraDevice::Start()
{
    ScheduleChaletStatusRequest();
    mChaletStatusTimer->start(1000);
    return RET_OK;
}

int CChaletLoraDevice::NewDeviceFrameReceived(int DeviceID, int DeviceAddress, int MessageID, int DataSize, QByteArray Data)
{
    switch(MessageID)
    {
        case CHALET_ACK:
        {
            CmdResponseReceived(CHALET_ACK);
            break;
        }
        case CHALET_GENERAL_STATUS_RESPONSE:
        {
            float temp;
            qDebug("Chalet Status RX");
            char VoltageArray[4];

            mChaletMainStatus.mInverterRelayStatus = Data[0];
            mChaletMainStatus.mWiFiModuleStatus = Data[1];
            VoltageArray[0] = Data[2];
            VoltageArray[1] = Data[3];
            VoltageArray[2] = Data[4];
            VoltageArray[3] = Data[5];
            memcpy(&temp,VoltageArray,4);
            mChaletMainStatus.mBatteryVoltage = temp;
            CmdResponseReceived(CHALET_GENERAL_STATUS_REQUEST);
            qDebug("voltage: %f",mChaletMainStatus.mBatteryVoltage);
            break;
        }
        case CHALET_AC_POWER_STATE_STATUS_RESPONSE:
        {
            mChaletMainStatus.mInverterRelayStatus = Data[0];
            CmdResponseReceived(CHALET_AC_POWER_SET_STATE_RESPONSE);
            break;
        }
        case CHALET_AC_POWER_SET_STATE_RESPONSE:
        {
            qDebug("Lora set Inverter Power response : 0x%d",(int)Data[0]);
            mChaletMainStatus.mInverterRelayStatus = Data[0];
            CmdResponseReceived(CHALET_AC_POWER_SET_STATE_REQUEST);
            break;
        }
        case CHALET_BATTERY_VOLTAGE_RESPONSE:
        {
            CmdResponseReceived(CHALET_BATTERY_VOLTAGE_REQUEST);
            break;
        }
        case CHALET_BATTERY_CURRENT_RESPONSE:
        {
            CmdResponseReceived(CHALET_BATTERY_CURRENT_REQUEST);
            break;
        }
        case CHALET_WIFI_STATUS_RESPONSE:
        {
            mChaletMainStatus.mWiFiModuleStatus = Data[0];
            CmdResponseReceived(CHALET_WIFI_STATUS_REQUEST);
            break;
        }
        case CHALET_WIFI_SET_STATE_RESPONSE:
        {
            qDebug("Lora set WiFi response : 0x%d",(int)Data[0]);
            mChaletMainStatus.mWiFiModuleStatus = Data[0];
            CmdResponseReceived(CHALET_WIFI_SET_STATE_REQUEST);
            break;
        }
        case CHALET_DO_HARAKIRI_CONFIRMATION:
        {
            if(Data[0] == (char)1)
            {
                qDebug("ChaletDuino has commited suicide (HARAKIRI)");
                mChaletMainStatus.mHarakiriDone = true;
            }
            else
            {
                qDebug("HARAKIRI magic word invalid.");
            }
            CmdResponseReceived(CHALET_DO_HARAKIRI_REQUEST);
            break;
        }
        case CHALET_REBOOT_CPU_RESPONSE:
        {
            if(Data[0] == (char)1)
            {
                qDebug("ChaletDuino is rebooting");
            }
            else
            {
                qDebug("Reboot magic word invalid");
            }
            CmdResponseReceived(CHALET_DO_HARAKIRI_REQUEST);
            break;
        }
        default:
        {
            return RET_ERROR;
            break;
        }

    }
    return RET_OK;
}

void CChaletLoraDevice::CommTimerExpired()
{
    if(mPendingNetworkMsgList.isEmpty())
    {
        qDebug("Empty command list in comm timer ");
        ScheduleChaletStatusRequest();
        mChaletStatusTimer->start(1000);
        return;
    }
    if(mPendingNetworkMsgList.first().PendingResponse == true)
    {
        //The current command is still waiting for a response.  Check how many times we tried to send it
        qDebug("Cmd 0x%x timetout... retrying",mPendingNetworkMsgList.first().mMessageID);
        if(mPendingNetworkMsgList.first().ResendCounter >= 5)
        {
            //TODO: manage this.  Module offline?
        }
        else
        {
            mPendingNetworkMsgList[0].ResendCounter++;
        }
    }

    qDebug("Sending chalet request 0x%x",mPendingNetworkMsgList.at(0).mMessageID);

    mPendingNetworkMsgList[0].PendingResponse = true;
    SendChaletCommand(mPendingNetworkMsgList.at(0).mMessageID,mPendingNetworkMsgList.at(0).mData.size(),mPendingNetworkMsgList.at(0).mData);

    //Harakiri and Reboot commands should not stay in the queue...
    if(mPendingNetworkMsgList.at(0).mMessageID == CHALET_DO_HARAKIRI_REQUEST ||
       mPendingNetworkMsgList.at(0).mMessageID == CHALET_REBOOT_CPU_REQUEST)
    {
        mPendingNetworkMsgList.clear();
        ScheduleChaletStatusRequest();
    }

    mChaletStatusTimer->start(5000);    //we should get an answer within 5 seconds.
//    SendChaletCommand(CHALET_GENERAL_STATUS_REQUEST,0,QByteArray());
}

int CChaletLoraDevice::SendWiFiModuleSetState(bool State)
{
    QByteArray Data;
    Data.resize(1);
    if(State)
    {
        Data[0] = 1;
    }
    else
    {
        Data[0] = 0;
    }

    ScheduleChaletCommand(CHALET_WIFI_SET_STATE_REQUEST,1,Data);
    return RET_OK;
}

int CChaletLoraDevice::SendInverterPowerRelayState(bool State)
{
    QByteArray Data;
    Data.resize(1);
    if(State)
    {
        Data[0] = 1;
    }
    else
    {
        Data[0] = 0;
    }

    ScheduleChaletCommand(CHALET_AC_POWER_SET_STATE_REQUEST,Data);
   // SendChaletCommand(CHALET_AC_POWER_SET_STATE_REQUEST,1,Data);
    return RET_OK;
}

int CChaletLoraDevice::SendDOHarakiri()
{
    QByteArray Data;    //Magic word...
    Data.clear();
    Data.append(0xBA);
    Data.append(0xAD);
    Data.append(0xBE);
    Data.append(0xEF);

    ScheduleChaletCommand(CHALET_DO_HARAKIRI_REQUEST,Data);
}

int CChaletLoraDevice::SendRebootCmd()
{
    QByteArray Data;    //Magic word...
    Data.clear();
    Data.append(0xBA);
    Data.append(0xAD);
    Data.append(0xCA);
    Data.append(0xFE);

    ScheduleChaletCommand(CHALET_REBOOT_CPU_REQUEST,Data);
}

int CChaletLoraDevice::SendChaletCommand(int CmdID, int DataSize, QByteArray Data)
{
    mNetworkInterfacePtr->SendNetworkMessage(ID_CHALET_DEVICE,mDeviceAddress,CmdID,DataSize,Data);
    return RET_OK;
}

int CChaletLoraDevice::CmdResponseReceived(int CmdID)
{
    Q_UNUSED(CmdID)

    qDebug("Chalet response received from cmd: 0x%x",CmdID);
    if(mPendingNetworkMsgList.size() == 0)
    {
        qDebug("Cmd ack received but list is empty!!!");
    }
    else
    {
        CChaletNetworkMessage Msg = mPendingNetworkMsgList.takeFirst();
        if(Msg.mMessageID != CmdID)
        {
            qDebug("Inconsistency between active cmd and ack received [received 0x%x] != [cur 0x%x]!!!", Msg.mMessageID,CmdID);
        }
    }

    if(mPendingNetworkMsgList.size() == 0)  //If no message is left pending... schedule status request
    {
        ScheduleChaletStatusRequest();
        mChaletStatusTimer->start(1000);//Next status request will be sent in 1000ms
    }
    else
    {
        mChaletStatusTimer->start(500); //wait a little and send the next cmd.
    }

    return RET_OK;
}

int CChaletLoraDevice::ScheduleChaletStatusRequest()
{
    ScheduleChaletCommand(CHALET_GENERAL_STATUS_REQUEST,0,QByteArray());
}

int CChaletLoraDevice::ScheduleChaletCommand(int CmdID, int DataSize, QByteArray Data)
{
    Q_UNUSED(DataSize)
    CChaletNetworkMessage Command(CmdID,Data);
    mPendingNetworkMsgList.append(Command);

    return RET_OK;
}

int CChaletLoraDevice::ScheduleChaletCommand(int CmdID, QByteArray Data)
{
    CChaletNetworkMessage Command(CmdID,Data);
    mPendingNetworkMsgList.append(Command);

    return RET_OK;
}