#include "CableTestPage.h"
#include "ui_CableTestPage.h"
#include "CableTestBench.h"
#include <QTextCodec>
#include "CableParametersData.h"
#include <QScrollBar>

CCableTestPage::CCableTestPage(QWidget *parent) :
    QWidget(parent),
    ui(new Ui::CCableTestPage)
{

    QTextCodec::setCodecForCStrings(QTextCodec::codecForName("UTF-8"));

    ui->setupUi(this);
    mProgramHandle = 0;

    ui->mStationNameCombo->insertItem(0,"Frontenac",QVariant("1S52"));
    ui->mStationNameCombo->insertItem(1,"Côte-Vertu",QVariant("2S22"));
    ui->mStationNameCombo->insertItem(2,"Angrignon",QVariant("1S18"));
    ui->mStationNameCombo->insertItem(3,"Garage Angrignon",QVariant("1G17"));
    ui->mStationNameCombo->insertItem(4,"Atwater",QVariant("1S34"));
    ui->mStationNameCombo->insertItem(5,"Lionel-Groulx",QVariant("1S32"));
    ui->mStationNameCombo->insertItem(6,"Viau",QVariant("1S60"));


    mInspectionNotDonePixmap = QPixmap("./images/todo.png").scaled(ui->mInspectionDoneIcon->geometry().width(),ui->mInspectionDoneIcon->geometry().height());
    mInspectionDonePixmap = QPixmap("./images/done1.png").scaled(ui->mInspectionDoneIcon->geometry().width(),ui->mInspectionDoneIcon->geometry().height());
    ui->mInspectionDoneIcon->setPixmap(mInspectionNotDonePixmap);

    connect(ui->mExecInspVisuelleBtn,SIGNAL(clicked()),this,SLOT(InspVisuelleBtnClicked()));
    connect(ui->mConnectorSelectWidget,SIGNAL(ConnectorSelected(CConnectorDefs::eConnectorType)),this,SLOT(ConnectorSelectionChanged(CConnectorDefs::eConnectorType)));
    ui->mInputTestVisualisationWidget->SetConnectorPinCount(0);
    ui->mOutputTestVisualisationWidget->SetConnectorPinCount(0);


    mGuiRefreshTimer.setSingleShot(false);
    mGuiRefreshTimer.setInterval(200);


    connect(ui->mStartTestBtn,SIGNAL(clicked()),this,SLOT(StartTestBtnClicked()));
    connect(ui->mReinitTestBtn,SIGNAL(clicked()),this,SLOT(ResetTestBtnClicked()));
    connect(ui->mNewCableBtn,SIGNAL(clicked()),this,SLOT(NewCableBtnClicked()));
    connect(ui->mStartManualTestBtn,SIGNAL(clicked()),this,SLOT(StartManualTestBtnClicked()));
    connect(ui->mOutputTestVisualisationWidget,SIGNAL(PinClicked(int)),this,SLOT(OutputConnectorPinClicked(int)));
    connect(&mGuiRefreshTimer,SIGNAL(timeout()),this,SLOT(GuiRefreshTimerExpired()));
    connect(ui->mSaveReportBtn,SIGNAL(clicked()),this,SLOT(SaveReportBtnClicked()));
    connect(ui->mOpenReportBtn,SIGNAL(clicked()),this,SLOT(OpenReportBtnClicked()));
    connect(ui->mIdentCableEditBox,SIGNAL(textEdited(QString)),this,SLOT(CableConfigTextChanged()));
    connect(ui->mNomTesteurEditBox,SIGNAL(textEdited(QString)),this,SLOT(CableConfigTextChanged()));



    mDefaultCableName = "CABLE_XX_NO_AA_BB.c";
    mDefaultInspectorName = "JFMartel";

    ui->mStartTestBtn->setEnabled(false);
    ui->mStartManualTestBtn->setEnabled(false);
    ui->mOutputTestVisualisationWidget->DisablePinClicks();

    QPalette pal;
    pal.setColor(QPalette::WindowText,Qt::red);
    ui->mVisualInspectionStepLabel->setPalette(pal);
    ui->mVisualInspectionStepLabel->setText("2. Inspection visuelle: À FAIRE");

    ui->mCableIdentStepLabel->setPalette(pal);
    ui->mCableIdentStepLabel->setText("1. Identification du câble: À REMPLIR");

    ui->mConnectorSelStepLabel->setPalette(pal);
    ui->mConnectorSelStepLabel->setText("3. Sélection du connecteur d'entrée: À FAIRE");



    ResetCable();
}

CCableTestPage::~CCableTestPage()
{
    delete ui;
}

void CCableTestPage::InspVisuelleBtnClicked()
{
    mProgramHandle->ExecVisualInspectionRequest();

}

int CCableTestPage::SetVisualInspectionDone(bool Done)
{
    if(Done)
    {
        ui->mInspectionDoneIcon->setPixmap(mInspectionDonePixmap);
        ui->mExecInspVisuelleBtn->setText(QString("Réviser\n Inspection").toUtf8());

        QPalette pal;
        pal.setColor(QPalette::WindowText,Qt::darkGreen);
        ui->mVisualInspectionStepLabel->setPalette(pal);
        ui->mVisualInspectionStepLabel->setText("2. Inspection visuelle: OK");
    }
    else
    {
        ui->mInspectionDoneIcon->setPixmap(mInspectionNotDonePixmap);
        ui->mExecInspVisuelleBtn->setText("Effectuer\n Inspection");

        QPalette pal;
        pal.setColor(QPalette::WindowText,Qt::red);
        ui->mVisualInspectionStepLabel->setPalette(pal);
        ui->mVisualInspectionStepLabel->setText("2. Inspection visuelle: À FAIRE");
    }
    return RET_OK;
}

int CCableTestPage::SetConnectorSelStep(bool done)
{
    QPalette pal;

    if(done)
    {
      pal.setColor(QPalette::WindowText,Qt::darkGreen);
      ui->mConnectorSelStepLabel->setPalette(pal);
      ui->mConnectorSelStepLabel->setText("3. Sélection du connecteur d'entrée: OK");
    }
    else
    {
        pal.setColor(QPalette::WindowText,Qt::red);
        ui->mConnectorSelStepLabel->setPalette(pal);
        ui->mConnectorSelStepLabel->setText("3. Sélection du connecteur d'entrée: À FAIRE");
    }

    return RET_OK;
}

int CCableTestPage::SetCableConfigureStep(bool done)
{
    QPalette pal;

    if(done)
    {
      pal.setColor(QPalette::WindowText,Qt::darkGreen);
      ui->mCableIdentStepLabel->setPalette(pal);
      ui->mCableIdentStepLabel->setText("1. Identification du câble: OK");
    }
    else
    {
        pal.setColor(QPalette::WindowText,Qt::red);
        ui->mCableIdentStepLabel->setPalette(pal);
        ui->mCableIdentStepLabel->setText("1. Identification du câble: À REMPLIR");
    }

    return RET_OK;
}


void CCableTestPage::ConnectorSelectionChanged(CConnectorDefs::eConnectorType ConType)
{
    CCable* Cable;
    Cable = mProgramHandle->SetSelectedConnector(ConType);

    if(Cable != 0)
    {
        ui->mInputTestVisualisationWidget->SetConnectorPinCount(Cable->GetInputConnector()->GetPinCount());
        ui->mOutputTestVisualisationWidget->SetConnectorPinCount(Cable->GetOutputConnector()->GetPinCount());
    }


}

void CCableTestPage::StartTestBtnClicked()
{
    mProgramHandle->StartPauseAutomaticTestRequest();
}

void CCableTestPage::StartManualTestBtnClicked()
{
    mProgramHandle->StartStopManualTestRequest();
}

void CCableTestPage::ResetTestBtnClicked()
{
    mProgramHandle->ResetAutomaticTestRequest();
}

void CCableTestPage::NewCableBtnClicked()
{
     mProgramHandle->NewCableRequest();
}

int CCableTestPage::ResetCable()
{
    //reset pins state visualization area
    ui->mInputTestVisualisationWidget->ClearConnectorsLists();
    ui->mOutputTestVisualisationWidget->ClearConnectorsLists();

    //Reset cable config zone
//    ui->mIdentCableEditBox->setText(mDefaultCableName);
//    ui->mNomTesteurEditBox->setText(mDefaultInspectorName);

    //Reset Inspection Visuelle result (main program will clear the form)
    SetVisualInspectionDone(false);

 //   SetCableConfigureStep(false);
    SetConnectorSelStep(false);

    //Clear connector selection zone
    ui->mConnectorSelectWidget->ClearAllConnectorsSelections();

    ui->mTestLogTextBox->clear();

    ui->mSaveReportBtn->setEnabled(false);
    ui->mOpenReportBtn->setEnabled(false);
    SetAutoTestResult("");

    return RET_OK;

}

int CCableTestPage::EnableStartTestBtn()
{
    ui->mStartTestBtn->setEnabled(true);
    ui->mStartManualTestBtn->setEnabled(true);
    return RET_OK;
}

int CCableTestPage::DisableStartTestBtn()
{
    ui->mStartTestBtn->setEnabled(false);
    ui->mStartManualTestBtn->setEnabled(false);
    return RET_OK;
}

int CCableTestPage::CableAutomaticTestStarted()
{
    ui->mStartManualTestBtn->setEnabled(false);
    DisableGuiForTest();
    ui->mStartTestBtn->setText("Interrompre Test");
    SetAutoTestResult("En Cours...",Qt::black);
    return RET_OK;
}

int CCableTestPage::CableAutomaticTestPaused()
{
    ui->mStartTestBtn->setText("Reprendre Test");
    return RET_OK;
}

int CCableTestPage::CableTestEnded()
{
    EnableGuiAfterTest();
    ui->mOutputTestVisualisationWidget->DisablePinClicks();
    ui->mStartManualTestBtn->setEnabled(true);
    ui->mStartTestBtn->setEnabled(true);
    ui->mStartTestBtn->setText("Démarrer Test");
    ui->mStartManualTestBtn->setText("Démarrer");
    ui->mReinitTestBtn->setEnabled(true);
    ui->mSaveReportBtn->setEnabled(true);

    return RET_OK;
}

int CCableTestPage::CableManualTestStarted()
{
    ui->mStartTestBtn->setEnabled(false);
    ui->mOutputTestVisualisationWidget->EnablePinClicks();
    DisableGuiForTest();
    ui->mStartManualTestBtn->setText("Terminer");
    ui->mReinitTestBtn->setEnabled(false);
    ui->mSaveReportBtn->setEnabled(false);
    return RET_OK;
}

int CCableTestPage::DisableGuiForTest()
{
    ui->mNewCableBtn->setEnabled(false);
    ui->mConnectorSelectWidget->setEnabled(false);
    ui->mIdentCableEditBox->setEnabled(false);
    ui->mExecInspVisuelleBtn->setEnabled(false);
    ui->mNomTesteurEditBox->setEnabled(false);
    ui->mTypeCableCombo->setEnabled(false);
    ui->mStationNameCombo->setEnabled(false);
    return RET_OK;
}

int CCableTestPage::EnableGuiAfterTest()
{
    ui->mNewCableBtn->setEnabled(true);
    ui->mConnectorSelectWidget->setEnabled(true);
    ui->mIdentCableEditBox->setEnabled(true);
    ui->mExecInspVisuelleBtn->setEnabled(true);
    ui->mNomTesteurEditBox->setEnabled(true);
    ui->mTypeCableCombo->setEnabled(true);
    ui->mStationNameCombo->setEnabled(true);
    return RET_OK;
}

void CCableTestPage::OutputConnectorPinClicked(int PinNbr)
{
    mProgramHandle->ManualPinToggleRequest(PinNbr);
}

void CCableTestPage::GuiRefreshTimerExpired()
{
    mProgramHandle->RefreshConnectorsStateRequest();
}

int CCableTestPage::SetOutputConnectorState(QBitArray PinStates)
{
    return ui->mOutputTestVisualisationWidget->SetConnectorPinStates(PinStates);
}

int CCableTestPage::SetInputConnectorState(QBitArray PinStates)
{
    return ui->mInputTestVisualisationWidget->SetConnectorPinStates(PinStates);
}

void CCableTestPage::showEvent(QShowEvent *event)
{

    qDebug("Refresh timer started");
    mGuiRefreshTimer.start();

}

void CCableTestPage::hideEvent(QHideEvent *event)
{
    qDebug("Refresh timer stopped");
    mGuiRefreshTimer.stop();
}

int CCableTestPage::FillReportCableParametersData(CCableParametersData *ReportPtr)
{
    ReportPtr->SetCableParams(ui->mStationNameCombo->currentText(),
                              ui->mStationNameCombo->itemData(ui->mStationNameCombo->currentIndex()).toString(),
                              ui->mIdentCableEditBox->text(),
                              ui->mTypeCableCombo->currentText(),
                              ui->mNomTesteurEditBox->text());
    return RET_OK;
}

void CCableTestPage::AddTestLogEntry(QString Entry)
{
    ui->mTestLogTextBox->insertPlainText(Entry);
    ui->mTestLogTextBox->verticalScrollBar()->setValue(ui->mTestLogTextBox->verticalScrollBar()->maximum());
}

void CCableTestPage::SaveReportBtnClicked()
{
    mProgramHandle->SaveReportRequest();
}

void CCableTestPage::OpenReportBtnClicked()
{
    mProgramHandle->OpenReportRequest();
}

int CCableTestPage::EnableOpenReportBtn()
{
    ui->mOpenReportBtn->setEnabled(true);
    return RET_OK;
}

int CCableTestPage::SetAutoTestResult(QString Result, QColor color)
{
    QPalette pal;
    pal.setColor(QPalette::WindowText,color);
    ui->mAutoTestResultLabel->setPalette(pal);
    ui->mAutoTestResultLabel->setText(Result);

    return RET_OK;
}

bool CCableTestPage::IsCableConfigured()
{
    if(ui->mIdentCableEditBox->text().isEmpty())
    {
        return false;
    }

    if(ui->mNomTesteurEditBox->text().isEmpty())
    {
        return false;
    }

    return true;
}

void CCableTestPage::CableConfigTextChanged()
{
    mProgramHandle->CableConfigChanged();
}