/*************************************************************************
 * Processor-specific object file.  Contains SFR definitions.
 *************************************************************************/
INPUT("processor.o")

/*************************************************************************
 * Processor-specific peripheral libraries are optional
 *************************************************************************/
OPTIONAL("libmchp_peripheral.a")
OPTIONAL("libmchp_peripheral_32MX795F512H.a")
/*************************************************************************

 * For interrupt vector handling
 *************************************************************************/
PROVIDE(_vector_spacing = 0x00000001);
/*_ebase_address  = 0x9D002000;*/  /*JFM 2012-10-06 - moved bootloader exception mem to BOOT mem so it doesn't get erased if a problem occurs during flashing*/
_ebase_address  = 0x9FC01000;

/*************************************************************************
 * Memory Address Equates
 *************************************************************************/
_RESET_ADDR              = 0xBFC00000;
_BEV_EXCPT_ADDR          = 0xBFC00380;
_DBG_EXCPT_ADDR          = 0xBFC00480;
_DBG_CODE_ADDR           = 0xBFC02000;
_DBG_CODE_SIZE           = 0xFF0     ;
_GEN_EXCPT_ADDR          = _ebase_address + 0x180;		/* As defined by the MIPS specification */

/*************************************************************************
 * Memory Regions
 *
 * Memory regions without attributes cannot be used for orphaned sections.
 * Only sections specifically assigned to these regions can be allocated
 * into these regions.
 *************************************************************************/
MEMORY
{
  kseg0_program_mem    (rx)  : ORIGIN = 0x9D000000, LENGTH = 0x4000		/* 4 program Flash pages are reserved for bootloader code */
  kseg0_boot_mem             : ORIGIN = 0x9FC00490, LENGTH = 0x970		/* C Init section goes here : ends at 0x9FC01370 */
  /*exception_mem              : ORIGIN = 0x9D002000, LENGTH = 0x1000		*/
  exception_mem              : ORIGIN = 0x9FC01000, LENGTH = 0x1000
  kseg1_boot_mem             : ORIGIN = 0xBFC00000, LENGTH = 0x490
  debug_exec_mem             : ORIGIN = 0xBFC02000, LENGTH = 0xFF0
  config3                    : ORIGIN = 0xBFC02FF0, LENGTH = 0x4
  config2                    : ORIGIN = 0xBFC02FF4, LENGTH = 0x4
  config1                    : ORIGIN = 0xBFC02FF8, LENGTH = 0x4
  config0                    : ORIGIN = 0xBFC02FFC, LENGTH = 0x4
  kseg1_data_mem       (w!x) : ORIGIN = 0xA0000000, LENGTH = 0x8000 /*0x20000*/
  sfrs                       : ORIGIN = 0xBF800000, LENGTH = 0x100000
  configsfrs                 : ORIGIN = 0xBFC02FF0, LENGTH = 0x10
}
SECTIONS
{
  .config_BFC02FF0 : {
    KEEP(*(.config_BFC02FF0))
  } > config3
  .config_BFC02FF4 : {
    KEEP(*(.config_BFC02FF4))
  } > config2
  .config_BFC02FF8 : {
    KEEP(*(.config_BFC02FF8))
  } > config1
  .config_BFC02FFC : {
    KEEP(*(.config_BFC02FFC))
  } > config0
}