677 lines
17 KiB
C
677 lines
17 KiB
C
/**
|
|
*
|
|
* \file
|
|
*
|
|
* \brief SPI Flash.
|
|
*
|
|
* Copyright (c) 2016-2018 Microchip Technology Inc. and its subsidiaries.
|
|
*
|
|
* \asf_license_start
|
|
*
|
|
* \page License
|
|
*
|
|
* Subject to your compliance with these terms, you may use Microchip
|
|
* software and any derivatives exclusively with Microchip products.
|
|
* It is your responsibility to comply with third party license terms applicable
|
|
* to your use of third party software (including open source software) that
|
|
* may accompany Microchip software.
|
|
*
|
|
* THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
|
|
* WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
|
|
* INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
|
|
* LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
|
|
* LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
|
|
* SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
|
|
* POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT
|
|
* ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
|
|
* RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
|
|
* THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
|
|
*
|
|
* \asf_license_stop
|
|
*
|
|
*/
|
|
|
|
#ifdef PROFILING
|
|
#include "windows.h"
|
|
#endif
|
|
#include "spi_flash/include/spi_flash.h"
|
|
#define DUMMY_REGISTER (0x1084)
|
|
|
|
#define TIMEOUT (-1) /*MS*/
|
|
|
|
//#define DISABLE_UNSED_FLASH_FUNCTIONS
|
|
|
|
#define HOST_SHARE_MEM_BASE (0xd0000UL)
|
|
#define CORTUS_SHARE_MEM_BASE (0x60000000UL)
|
|
#define NMI_SPI_FLASH_ADDR (0x111c)
|
|
/***********************************************************
|
|
SPI Flash DMA
|
|
***********************************************************/
|
|
#define GET_UINT32(X,Y) (X[0+Y] + ((uint32)X[1+Y]<<8) + ((uint32)X[2+Y]<<16) +((uint32)X[3+Y]<<24))
|
|
#define SPI_FLASH_BASE (0x10200)
|
|
#define SPI_FLASH_MODE (SPI_FLASH_BASE + 0x00)
|
|
#define SPI_FLASH_CMD_CNT (SPI_FLASH_BASE + 0x04)
|
|
#define SPI_FLASH_DATA_CNT (SPI_FLASH_BASE + 0x08)
|
|
#define SPI_FLASH_BUF1 (SPI_FLASH_BASE + 0x0c)
|
|
#define SPI_FLASH_BUF2 (SPI_FLASH_BASE + 0x10)
|
|
#define SPI_FLASH_BUF_DIR (SPI_FLASH_BASE + 0x14)
|
|
#define SPI_FLASH_TR_DONE (SPI_FLASH_BASE + 0x18)
|
|
#define SPI_FLASH_DMA_ADDR (SPI_FLASH_BASE + 0x1c)
|
|
#define SPI_FLASH_MSB_CTL (SPI_FLASH_BASE + 0x20)
|
|
#define SPI_FLASH_TX_CTL (SPI_FLASH_BASE + 0x24)
|
|
|
|
/*********************************************/
|
|
/* STATIC FUNCTIONS */
|
|
/*********************************************/
|
|
|
|
/**
|
|
* @fn spi_flash_read_status_reg
|
|
* @brief Read status register
|
|
* @param[OUT] val
|
|
value of status reg
|
|
* @return Status of execution
|
|
* @note Compatible with MX25L6465E
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_read_status_reg(uint8 * val)
|
|
{
|
|
sint8 ret = M2M_SUCCESS;
|
|
uint8 cmd[1];
|
|
uint32 reg;
|
|
|
|
cmd[0] = 0x05;
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 4);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]);
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x01);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, DUMMY_REGISTER);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 1 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)®);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(reg != 1);
|
|
|
|
reg = (M2M_SUCCESS == ret)?(nm_read_reg(DUMMY_REGISTER)):(0);
|
|
*val = reg & 0xff;
|
|
return ret;
|
|
}
|
|
|
|
#ifdef DISABLE_UNSED_FLASH_FUNCTIONS
|
|
/**
|
|
* @fn spi_flash_read_security_reg
|
|
* @brief Read security register
|
|
* @return Security register value
|
|
* @note Compatible with MX25L6465E
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static uint8 spi_flash_read_security_reg(void)
|
|
{
|
|
uint8 cmd[1];
|
|
uint32 reg;
|
|
sint8 ret = M2M_SUCCESS;
|
|
|
|
cmd[0] = 0x2b;
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 1);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]);
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x01);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, DUMMY_REGISTER);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 1 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)®);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(reg != 1);
|
|
reg = (M2M_SUCCESS == ret)?(nm_read_reg(DUMMY_REGISTER)):(0);
|
|
|
|
return (sint8)reg & 0xff;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_gang_unblock
|
|
* @brief Unblock all flash area
|
|
* @note Compatible with MX25L6465E
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_gang_unblock(void)
|
|
{
|
|
uint8 cmd[1];
|
|
uint32 val = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
|
|
cmd[0] = 0x98;
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 0);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]);
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x01);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, 0);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 1 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)&val);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(val != 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_clear_security_flags
|
|
* @brief Clear all security flags
|
|
* @note Compatible with MX25L6465E
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_clear_security_flags(void)
|
|
{
|
|
uint8 cmd[1];
|
|
uint32 val = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
|
|
cmd[0] = 0x30;
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 0);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]);
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x01);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, 0);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 1 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)&val);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(val != 1);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @fn spi_flash_load_to_cortus_mem
|
|
* @brief Load data from SPI flash into cortus memory
|
|
* @param[IN] u32MemAdr
|
|
* Cortus load address. It must be set to its AHB access address
|
|
* @param[IN] u32FlashAdr
|
|
* Address to read from at the SPI flash
|
|
* @param[IN] u32Sz
|
|
* Data size
|
|
* @return Status of execution
|
|
* @note Compatible with MX25L6465E and should be working with other types
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_load_to_cortus_mem(uint32 u32MemAdr, uint32 u32FlashAdr, uint32 u32Sz)
|
|
{
|
|
uint8 cmd[5];
|
|
uint32 val = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
|
|
cmd[0] = 0x0b;
|
|
cmd[1] = (uint8)(u32FlashAdr >> 16);
|
|
cmd[2] = (uint8)(u32FlashAdr >> 8);
|
|
cmd[3] = (uint8)(u32FlashAdr);
|
|
cmd[4] = 0xA5;
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, u32Sz);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]|(cmd[1]<<8)|(cmd[2]<<16)|(cmd[3]<<24));
|
|
ret += nm_write_reg(SPI_FLASH_BUF2, cmd[4]);
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x1f);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, u32MemAdr);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 5 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)&val);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(val != 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_sector_erase
|
|
* @brief Erase sector (4KB)
|
|
* @param[IN] u32FlashAdr
|
|
* Any memory address within the sector
|
|
* @return Status of execution
|
|
* @note Compatible with MX25L6465E and should be working with other types
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_sector_erase(uint32 u32FlashAdr)
|
|
{
|
|
uint8 cmd[4];
|
|
uint32 val = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
|
|
cmd[0] = 0x20;
|
|
cmd[1] = (uint8)(u32FlashAdr >> 16);
|
|
cmd[2] = (uint8)(u32FlashAdr >> 8);
|
|
cmd[3] = (uint8)(u32FlashAdr);
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 0);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]|(cmd[1]<<8)|(cmd[2]<<16)|(cmd[3]<<24));
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x0f);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, 0);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 4 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)&val);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(val != 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_write_enable
|
|
* @brief Send write enable command to SPI flash
|
|
* @return Status of execution
|
|
* @note Compatible with MX25L6465E and should be working with other types
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_write_enable(void)
|
|
{
|
|
uint8 cmd[1];
|
|
uint32 val = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
|
|
cmd[0] = 0x06;
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 0);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]);
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x01);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, 0);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 1 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)&val);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(val != 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_write_disable
|
|
* @brief Send write disable command to SPI flash
|
|
* @note Compatible with MX25L6465E and should be working with other types
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_write_disable(void)
|
|
{
|
|
uint8 cmd[1];
|
|
uint32 val = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
cmd[0] = 0x04;
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 0);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]);
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x01);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, 0);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 1 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)&val);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(val != 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_page_program
|
|
* @brief Write data (less than page size) from cortus memory to SPI flash
|
|
* @param[IN] u32MemAdr
|
|
* Cortus data address. It must be set to its AHB access address
|
|
* @param[IN] u32FlashAdr
|
|
* Address to write to at the SPI flash
|
|
* @param[IN] u32Sz
|
|
* Data size
|
|
* @note Compatible with MX25L6465E and should be working with other types
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_page_program(uint32 u32MemAdr, uint32 u32FlashAdr, uint32 u32Sz)
|
|
{
|
|
uint8 cmd[4];
|
|
uint32 val = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
|
|
cmd[0] = 0x02;
|
|
cmd[1] = (uint8)(u32FlashAdr >> 16);
|
|
cmd[2] = (uint8)(u32FlashAdr >> 8);
|
|
cmd[3] = (uint8)(u32FlashAdr);
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 0);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]|(cmd[1]<<8)|(cmd[2]<<16)|(cmd[3]<<24));
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x0f);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, u32MemAdr);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 4 | (1<<7) | ((u32Sz & 0xfffff) << 8));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)&val);
|
|
if(M2M_SUCCESS != ret) break;
|
|
}
|
|
while(val != 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_read_internal
|
|
* @brief Read from data from SPI flash
|
|
* @param[OUT] pu8Buf
|
|
* Pointer to data buffer
|
|
* @param[IN] u32Addr
|
|
* Address to read from at the SPI flash
|
|
* @param[IN] u32Sz
|
|
* Data size
|
|
* @note Data size must be < 64KB (limitation imposed by the bus wrapper)
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_read_internal(uint8 *pu8Buf, uint32 u32Addr, uint32 u32Sz)
|
|
{
|
|
sint8 ret = M2M_SUCCESS;
|
|
/* read size must be < 64KB */
|
|
ret = spi_flash_load_to_cortus_mem(HOST_SHARE_MEM_BASE, u32Addr, u32Sz);
|
|
if(M2M_SUCCESS != ret) goto ERR;
|
|
ret = nm_read_block(HOST_SHARE_MEM_BASE, pu8Buf, u32Sz);
|
|
ERR:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_pp
|
|
* @brief Program data of size less than a page (256 bytes) at the SPI flash
|
|
* @param[IN] u32Offset
|
|
* Address to write to at the SPI flash
|
|
* @param[IN] pu8Buf
|
|
* Pointer to data buffer
|
|
* @param[IN] u32Sz
|
|
* Data size
|
|
* @return Status of execution
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
static sint8 spi_flash_pp(uint32 u32Offset, uint8 *pu8Buf, uint16 u16Sz)
|
|
{
|
|
sint8 ret = M2M_SUCCESS;
|
|
uint8 tmp;
|
|
spi_flash_write_enable();
|
|
/* use shared packet memory as temp mem */
|
|
ret += nm_write_block(HOST_SHARE_MEM_BASE, pu8Buf, u16Sz);
|
|
ret += spi_flash_page_program(HOST_SHARE_MEM_BASE, u32Offset, u16Sz);
|
|
do
|
|
{
|
|
if(ret != M2M_SUCCESS) goto ERR;
|
|
ret += spi_flash_read_status_reg(&tmp);
|
|
}
|
|
while(tmp & 0x01);
|
|
ret += spi_flash_write_disable();
|
|
ERR:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_rdid
|
|
* @brief Read SPI Flash ID
|
|
* @return SPI FLash ID
|
|
* @author M.S.M
|
|
* @version 1.0
|
|
*/
|
|
static uint32 spi_flash_rdid(void)
|
|
{
|
|
unsigned char cmd[1];
|
|
uint32 reg = 0;
|
|
uint32 cnt = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
|
|
cmd[0] = 0x9f;
|
|
|
|
ret += nm_write_reg(SPI_FLASH_DATA_CNT, 4);
|
|
ret += nm_write_reg(SPI_FLASH_BUF1, cmd[0]);
|
|
ret += nm_write_reg(SPI_FLASH_BUF_DIR, 0x1);
|
|
ret += nm_write_reg(SPI_FLASH_DMA_ADDR, DUMMY_REGISTER);
|
|
ret += nm_write_reg(SPI_FLASH_CMD_CNT, 1 | (1<<7));
|
|
do
|
|
{
|
|
ret += nm_read_reg_with_ret(SPI_FLASH_TR_DONE, (uint32 *)®);
|
|
if(M2M_SUCCESS != ret) break;
|
|
if(++cnt > 500)
|
|
{
|
|
ret = M2M_ERR_INIT;
|
|
break;
|
|
}
|
|
}
|
|
while(reg != 1);
|
|
reg = (M2M_SUCCESS == ret)?(nm_read_reg(DUMMY_REGISTER)):(0);
|
|
M2M_PRINT("Flash ID %x \n",(unsigned int)reg);
|
|
return reg;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_unlock
|
|
* @brief Unlock SPI Flash
|
|
* @author M.S.M
|
|
* @version 1.0
|
|
*/
|
|
#if 0
|
|
static void spi_flash_unlock(void)
|
|
{
|
|
uint8 tmp;
|
|
tmp = spi_flash_read_security_reg();
|
|
spi_flash_clear_security_flags();
|
|
if(tmp & 0x80)
|
|
{
|
|
spi_flash_write_enable();
|
|
spi_flash_gang_unblock();
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*********************************************/
|
|
/* GLOBAL FUNCTIONS */
|
|
/*********************************************/
|
|
|
|
/**
|
|
* @fn spi_flash_read
|
|
* @brief Read from data from SPI flash
|
|
* @param[OUT] pu8Buf
|
|
* Pointer to data buffer
|
|
* @param[IN] u32offset
|
|
* Address to read from at the SPI flash
|
|
* @param[IN] u32Sz
|
|
* Data size
|
|
* @return Status of execution
|
|
* @note Data size is limited by the SPI flash size only
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
sint8 spi_flash_read(uint8 *pu8Buf, uint32 u32offset, uint32 u32Sz)
|
|
{
|
|
sint8 ret = M2M_SUCCESS;
|
|
if(u32Sz > FLASH_BLOCK_SIZE)
|
|
{
|
|
do
|
|
{
|
|
ret = spi_flash_read_internal(pu8Buf, u32offset, FLASH_BLOCK_SIZE);
|
|
if(M2M_SUCCESS != ret) goto ERR;
|
|
u32Sz -= FLASH_BLOCK_SIZE;
|
|
u32offset += FLASH_BLOCK_SIZE;
|
|
pu8Buf += FLASH_BLOCK_SIZE;
|
|
} while(u32Sz > FLASH_BLOCK_SIZE);
|
|
}
|
|
|
|
ret = spi_flash_read_internal(pu8Buf, u32offset, u32Sz);
|
|
|
|
ERR:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_write
|
|
* @brief Proram SPI flash
|
|
* @param[IN] pu8Buf
|
|
* Pointer to data buffer
|
|
* @param[IN] u32Offset
|
|
* Address to write to at the SPI flash
|
|
* @param[IN] u32Sz
|
|
* Data size
|
|
* @return Status of execution
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
sint8 spi_flash_write(uint8* pu8Buf, uint32 u32Offset, uint32 u32Sz)
|
|
{
|
|
#ifdef PROFILING
|
|
unsigned long long t1 = 0;
|
|
uint32 percent =0;
|
|
uint32 tpercent =0;
|
|
#endif
|
|
sint8 ret = M2M_SUCCESS;
|
|
uint32 u32wsz;
|
|
uint32 u32off;
|
|
uint32 u32Blksz;
|
|
u32Blksz = FLASH_PAGE_SZ;
|
|
u32off = u32Offset % u32Blksz;
|
|
#ifdef PROFILING
|
|
tpercent = (u32Sz/u32Blksz)+((u32Sz%u32Blksz)>0);
|
|
t1 = GetTickCount64();
|
|
M2M_PRINT(">Start programming...\r\n");
|
|
#endif
|
|
if(u32Sz<=0)
|
|
{
|
|
M2M_ERR("Data size = %d",(int)u32Sz);
|
|
ret = M2M_ERR_FAIL;
|
|
goto ERR;
|
|
}
|
|
|
|
if (u32off)/*first part of data in the address page*/
|
|
{
|
|
u32wsz = u32Blksz - u32off;
|
|
if(spi_flash_pp(u32Offset, pu8Buf, (uint16)BSP_MIN(u32Sz, u32wsz))!=M2M_SUCCESS)
|
|
{
|
|
ret = M2M_ERR_FAIL;
|
|
goto ERR;
|
|
}
|
|
if (u32Sz < u32wsz) goto EXIT;
|
|
pu8Buf += u32wsz;
|
|
u32Offset += u32wsz;
|
|
u32Sz -= u32wsz;
|
|
}
|
|
while (u32Sz > 0)
|
|
{
|
|
u32wsz = BSP_MIN(u32Sz, u32Blksz);
|
|
|
|
/*write complete page or the remaining data*/
|
|
if(spi_flash_pp(u32Offset, pu8Buf, (uint16)u32wsz)!=M2M_SUCCESS)
|
|
{
|
|
ret = M2M_ERR_FAIL;
|
|
goto ERR;
|
|
}
|
|
pu8Buf += u32wsz;
|
|
u32Offset += u32wsz;
|
|
u32Sz -= u32wsz;
|
|
#ifdef PROFILING
|
|
percent++;
|
|
printf("\r>Complete Percentage = %d%%.\r",((percent*100)/tpercent));
|
|
#endif
|
|
}
|
|
EXIT:
|
|
#ifdef PROFILING
|
|
M2M_PRINT("\rDone\t\t\t\t\t\t");
|
|
M2M_PRINT("\n#Programming time = %f sec\n\r",(GetTickCount64() - t1)/1000.0);
|
|
#endif
|
|
ERR:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_erase
|
|
* @brief Erase from data from SPI flash
|
|
* @param[IN] u32Offset
|
|
* Address to write to at the SPI flash
|
|
* @param[IN] u32Sz
|
|
* Data size
|
|
* @return Status of execution
|
|
* @note Data size is limited by the SPI flash size only
|
|
* @author M. Abdelmawla
|
|
* @version 1.0
|
|
*/
|
|
sint8 spi_flash_erase(uint32 u32Offset, uint32 u32Sz)
|
|
{
|
|
uint32 i = 0;
|
|
sint8 ret = M2M_SUCCESS;
|
|
uint8 tmp = 0;
|
|
#ifdef PROFILING
|
|
unsigned long long t;
|
|
t = GetTickCount64();
|
|
#endif
|
|
M2M_DBG("\r\n>Start erasing...\r\n");
|
|
for(i = u32Offset; i < (u32Sz +u32Offset); i += (16*FLASH_PAGE_SZ))
|
|
{
|
|
ret += spi_flash_write_enable();
|
|
ret += spi_flash_read_status_reg(&tmp);
|
|
ret += spi_flash_sector_erase(i);
|
|
ret += spi_flash_read_status_reg(&tmp);
|
|
do
|
|
{
|
|
if(ret != M2M_SUCCESS) goto ERR;
|
|
ret += spi_flash_read_status_reg(&tmp);
|
|
}while(tmp & 0x01);
|
|
|
|
}
|
|
M2M_DBG("Done\r\n");
|
|
#ifdef PROFILING
|
|
M2M_PRINT("#Erase time = %f sec\n", (GetTickCount64()-t)/1000.0);
|
|
#endif
|
|
ERR:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @fn spi_flash_get_size
|
|
* @brief Get size of SPI Flash
|
|
* @return Size of Flash
|
|
* @author M.S.M
|
|
* @version 1.0
|
|
*/
|
|
uint32 spi_flash_get_size(void)
|
|
{
|
|
uint32 u32FlashId = 0, u32FlashPwr = 0;
|
|
static uint32 gu32InernalFlashSize= 0;
|
|
|
|
if(!gu32InernalFlashSize)
|
|
{
|
|
u32FlashId = spi_flash_rdid();//spi_flash_probe();
|
|
if(u32FlashId != 0xffffffff)
|
|
{
|
|
/*flash size is the third byte from the FLASH RDID*/
|
|
u32FlashPwr = ((u32FlashId>>16)&0xff) - 0x11; /*2MBIT is the min*/
|
|
/*That number power 2 to get the flash size*/
|
|
gu32InernalFlashSize = 1<<u32FlashPwr;
|
|
M2M_INFO("Flash Size %lu Mb\n",gu32InernalFlashSize);
|
|
}
|
|
else
|
|
{
|
|
M2M_ERR("Cann't Detect Flash size\n");
|
|
}
|
|
}
|
|
|
|
return gu32InernalFlashSize;
|
|
} |